FR     SP
Downloads

DynaStrip releases for Macintosh

  1. All job components from previous versions (such as marks, output devices, plate definitions) are compatible with the new DynaStrip version, so the latest version can be installed over an existing one. However, it is strongly recommended to keep a backup copy of the entire previous DynaStrip folder before upgrading. Please see Upgrade procedure in Release Notes document.
  2. You may need an activation code to use the latest version: contact activation@dynagram.com. You should obtain your upgrade code BEFORE installing.


Releases


  Version 7.5.0c

Compatible with: Mac OS: v10.11 or v.10.12

If you have version 7.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.5.0c - Macintosh

Fixes in 7.5.0c

Compatibility: Mac OSX 10.11 and 10.12 support

• 7252 The compressed PDF files are no longer recognized on Mac OS 10.11 and 10.12.
• 7253 The installer version 7.5.0b does not work correctly on MacOS 10.12
New Sentinel Runtime driver 7.51 package included in DS750cE disk image.


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 
Several bugs have been resolved. For more details, see Release Notes for this version.



Download

Compatible with: Mac OS: v10.11 ou v.10.12

Si vous avez la version 7.0 et moins, vous devez acheter la mise ŕ niveau.

What is new in this release: DynaStrip 7.5.0c - Macintosh

Corrections dans 7.5.0c

Compatibilité: Support de Mac OS 10.11 et 10.12

• 7252 Les fichiers PDF compressés ne sont plus reconnus Mac OS 10.11 et 10.12.
• 7253 L'installateur de la version 7.5.0b ne fonctionne pas correctement sur Mac OS 10.12
Nouvel installeur Sentinel Runtime 7.51 inclus sur le disque image.


Quoi de neuf dans la version 7.5.0
 

1.1 Couches de couleurs et réglages de densité d’encres pour toutes les marques

Afin de mieux répondre à divers besoins d’impression et en particulier pour les presses digitales, DynaStrip v7.5 offre la possibilité de gérer de façon précise les couleurs et les densités d’encre de chacune des marques d’imposition. 
L’utilisateur a maintenant le contrôle complet pour placer n’importe quelle marque sur certaines couleurs sélectionnées, ou pour éviter l’excès d’encre en appliquant un pourcentage de couverture différent pour chaque couche de couleur (CMJN ou Pantone).



Des réglages de densité pemettant des valeurs entre 0 % et 100 % ont été ajoutés dans un dialogue de sélection des couleurs et ce pour toutes les marques imprimables: 
• Marques de rognage et de fond perdu (nouveau dialogue de couches de couleurs),
• Marques de plis,
• Marques de coins de feuilles (nouvelle préférence).
• Marques linéaires (la valeur de densité de chaque segment est cumulée avec celle des encres), 
• Marques de registre, 
• Marques d’assemblage, 
• Marque de texte, 
• Codes à barres (noir seulement par défaut), 
• Marque de distance, 
La fonctionnalité est compatible avec tous les formats de sortie (PDF, JDF, PJTF et PS, en environnement Séparation et Composite). 
 

1.2 Import / export de modèles TPL

Plusieurs améliorations ont été apportées pour l’import et l’export de modèles TPL afin d’amoindrir les différences au montage causées par les particularités de chaque format : 
• Meilleure gestion des marques de texte placées sur les deux côtés de la feuille, 
• Ajout automatique des couleurs de quadrichromie dans la table des couleurs pour mieux gérer la conversion des marques,
• Prise en charge des densités d’encre lors de l’import/export de modèles TPL. 
 

1.3 Modules d’automatisation

Dans DynaStrip Automation, il est maintenant possible de gérer jusqu’à 400 hotfolders simultanément. 
De plus le module JT-Flow permet de nouveaux algorithmes de pagination par incrémentation et décrémentation lors de la copie des feuilles. 

Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.



Download

Compatible with: Mac OS: v10.11 or v.10.12

If you have version 7.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.5.0c - Macintosh

Fixes in 7.5.0c

Compatibility: Mac OSX 10.11 and 10.12 support

• 7252 The compressed PDF files are no longer recognized on Mac OS 10.11 and 10.12.
• 7253 The installer version 7.5.0b does not work correctly on MacOS 10.12
New Sentinel Runtime driver 7.51 package included in DS750cG disk image.


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 
Several bugs have been resolved. For more details, see Release Notes for this version.



Download

Compatible with: Mac OS: v10.11 or v.10.12

If you have version 7.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.5.0c - Macintosh

Fixes in 7.5.0c

Compatibility: Mac OSX 10.11 and 10.12 support

• 7252 The compressed PDF files are no longer recognized on Mac OS 10.11 and 10.12.
• 7253 The installer version 7.5.0b does not work correctly on MacOS 10.12
New Sentinel Runtime driver 7.51 package included in DS750cS disk image.


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 
Several bugs have been resolved. For more details, see Release Notes for this version.



Download


  Version 7.5.0b

Compatible with: Mac OS X Intel: v10.6.8, v10.7.4, v10.8, v10.9, v10.10 and Mac OS X Power PC: v.10.4.11 or v10.5.8

If you have version 7.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.5.0b - Macintosh

Compatibility: Mac OSX 10.10 support


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 
Several bugs have been resolved. For more details, see Release Notes for this version.



Download

Compatible with: Mac OS X Intel: v10.6.8, v10.7.4, v10.8, v10.9, v10.10 et Mac OS X Power PC: v.10.4.11 ou v10.5.8

Si vous avez la version 7.0 et moins, vous devez acheter la mise ŕ niveau.

What is new in this release: DynaStrip 7.5.0b - Macintosh

Compatibilité: Support de Mac OSX 10.10

 

Quoi de neuf dans la version 7.5.0
 

1.1 Couches de couleurs et réglages de densité d’encres pour toutes les marques

Afin de mieux répondre à divers besoins d’impression et en particulier pour les presses digitales, DynaStrip v7.5 offre la possibilité de gérer de façon précise les couleurs et les densités d’encre de chacune des marques d’imposition. 
L’utilisateur a maintenant le contrôle complet pour placer n’importe quelle marque sur certaines couleurs sélectionnées, ou pour éviter l’excès d’encre en appliquant un pourcentage de couverture différent pour chaque couche de couleur (CMJN ou Pantone).



Des réglages de densité pemettant des valeurs entre 0 % et 100 % ont été ajoutés dans un dialogue de sélection des couleurs et ce pour toutes les marques imprimables: 
• Marques de rognage et de fond perdu (nouveau dialogue de couches de couleurs),
• Marques de plis,
• Marques de coins de feuilles (nouvelle préférence).
• Marques linéaires (la valeur de densité de chaque segment est cumulée avec celle des encres), 
• Marques de registre, 
• Marques d’assemblage, 
• Marque de texte, 
• Codes à barres (noir seulement par défaut), 
• Marque de distance, 
La fonctionnalité est compatible avec tous les formats de sortie (PDF, JDF, PJTF et PS, en environnement Séparation et Composite). 
 

1.2 Import / export de modèles TPL

Plusieurs améliorations ont été apportées pour l’import et l’export de modèles TPL afin d’amoindrir les différences au montage causées par les particularités de chaque format : 
• Meilleure gestion des marques de texte placées sur les deux côtés de la feuille, 
• Ajout automatique des couleurs de quadrichromie dans la table des couleurs pour mieux gérer la conversion des marques,
• Prise en charge des densités d’encre lors de l’import/export de modèles TPL. 
 

1.3 Modules d’automatisation

Dans DynaStrip Automation, il est maintenant possible de gérer jusqu’à 400 hotfolders simultanément. 
De plus le module JT-Flow permet de nouveaux algorithmes de pagination par incrémentation et décrémentation lors de la copie des feuilles. 

Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.



Download

What is new in this release: DynaStrip 7.5.0b - Macintosh

Compatibility: Mac OSX 10.10 support


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 
Several bugs have been resolved. For more details, see Release Notes for this version.



Download

Compatible with: Mac OS X Intel: v10.6.8, v10.7.4, v10.8, v10.9, v10.10 and Mac OS X Power PC: v.10.4.11 or v10.5.8

If you have version 7.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.5.0b - Macintosh

Compatibility: Mac OSX 10.10 support


What new in version 7.5.0
 

1.1 Color layers and ink density settings for all marks

To better meet different printing needs and especially for digital presses, DynaStrip v7.5 provides the ability to manage precisely the colors and the ink densities for every imposition marks. 
The user has now complete control to place any mark on selected colors only, and to avoid excess ink coverage by using a different percentage of ink density for each color layer (CMYK or Pantone). 
 


A color selection dialog with density settings allowing values between 0% and 100% is available for all printable marks: 
• Trim and Bleed marks (new Color layers window),
• Sheet corners (new preference),
• Fold marks,
• Linear marks (the density value of each segment is combined with that of the ink), 
• Register marks, 
• Assembly marks, 
• Text marks, 
• Barcodes (the default is black only), 
• Distance tags.
The feature is compatible with all output formats (PDF, JDF, PJTF and PS, for Separation and Composite environments). 
 

1.2 Import / export of TPL templates

Several improvements were made to the import and export of TPL templates to lessen the layout differences due to each format’s specific aspects: 
• Better management of text marks placed on both sides of the sheet, 
• Automatic addition of process colors in the color table to better manage marks, 
• Support for ink densities during import / export of TPL templates. 
 

1.3 Automation modules

In DynaStrip Automation, it is now possible to manage up to 400 hotfolders simultaneously.
In addition, the JT-Flow module allows new algorithms to increment and decrement pagination when copying sheets. 
 

Several bugs have been resolved. For more details, see Release Notes for this version.



Download


  Version 7.0.0

Compatible with: Mac OS X 10.4, 10.5, 10.6 or 10.7

If you have version 6.5 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.0.0 - Macintosh

DynaStrip 7.0 carries on the productivity goal of the last DynaStrip upgrades by featuring even smarter Layout Reflow, quick access to object libraries and templates, new options for marks and Automation, and single job working files. 

1.1 More Dynamic Objects for Layout Reflow 

The Layout Reflow function is smarter than ever with the addition of new dynamic behaviours. 
• Imported marks such as color bars can set to dynamically adapt to the sheet size. The image of the mark is cropped or repeated to fill the image area from the left side or the center, and an additional trim can be added to offset the mark from the sheet edges. 
• Imported marks can also be attached to signatures. Their size and position are automatically adapted in all working situations: when manually placed on the light table, when used in mark sets and when using Layout Reflow. 
• The sheet size can be modified at will while keeping the same relative signature position, in the center of the sheet, or snapped to the gripper. The position of all marks attached to the sheet will also adapt and color bars may resize to fit the new sheet format. 
• When using Layout Reflow, all marks keep their intended position by detecting and memorizing anchor points relative to the object to which they are attached: sheet, signature or page. When the object is moved or resized, the marks follow in all circumstances. 
The Layout Reflow function reads the number of pages and the trim box information from PDF documents and takes into account all changes done to the initial sheet layout to dynamically generate the entire job layout based on the new production data. The same template can thus be used again and again to build a complete imposition job with a single click.


1.2 Quick Access to Object Libraries 

Working on the light table is easier than ever with the convenient pull down menus for quick access to object libraries. Clicking on the Definition icon of an imposition object displays the list of all saved parameters for this object: sheet, signature, page, and all marks. 
A quick access menu is also available for Sheet templates, in the Load template action icon of the Sheet Mode. Starting a new DynaStrip job from a template is now a breeze and when coupled with the Layout Reflow function, the new access to libraries truly empowers the prepress operator with a quick, robust and flexible production tool. 
The new quick access menus are fully compatible with object definition files and templates created with previous DynaStrip versions. All files must be gathered in a central desktop or network folder that can be defined in the Preferences dialogue. Also note that the Preferences dialogue is now split in two distinct panels for Settings and Folders, for more convenience. 

1.3 Greater Ease of Use

Productivity also means ease of use. DynaStrip 7.0 includes a number of other enhancements to simplify the day-to-day operations. Among them: 
• DynaStrip jobs are now saved in a single .dsz working file to ease file sharing and archiving. 
• DynaStrip Automation users will benefit from the live refresh of the document page preview (Raster Mode function). You can now watch the automated imposition process with page thumbnails popping up in the layout in real time. 
• To allow for more visibility in this automation context, the maximum number of sheet that can be simultaneously displayed on the light table has been increased to 60.
 

1.4 More Flexibility for Prepress and Press 

DynaStrip 7.0 adds new Prepress and Press functionalities: 
• Double-sided Imported Marks can now follow or not the flip axis on Back to adapt to different perfecting press requirements. No need to define and place single-sided marks on both sides, a substantial time saver. 
• Side guides can also follow or not the flip axis on Back to adapt to various perfecting presses. 
• When manually positionning an Imported Mark on a Work and Turn or Work and Tumble sheet, a Single side attribute is enforced. 
• The maximum number of plate setups has been increased to 200 to simplify the creation of prepress workflows for multiple output destinations. Plate Setups combine sheet and plate definitions and allow for specific adjustments for each sheet/plate combination.

Several bugs have been resolved. For more details, see Release Notes for this version.

Download

Compatible with: Mac OS X 10.4, 10.5, 10.6 or 10.7

If you have version 6.5 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.0.0 - Macintosh

DynaStrip 7.0 poursuit l'objectif de productivité des précédentes versions de DynaStrip en mettant en vedette une fonction de Refonte du montage encore plus intelligente, un accès rapide aux bibliothèques d'objets et de modèles, de nouvelles options pour les marques et l'automatisation, ainsi que des fichiers de travail uniques. 

1.1 Objets plus dynamiques pour la Refonte du montage

La fonction de Refonte du montage est plus intelligente que jamais avec l'ajout de nouveaux comportements dynamiques. 
• Les Marques importées telles que des barres de couleurs peuvent être définies pour s'adapter dynamiquement à la taille de la feuille. L'image de la marque est rognée ou répétée pour remplir la zone d'image à partir de la gauche ou du centre, et un retrait supplémentaire peut être ajouté pour ajuster la marque aux bords de feuille. 
• Les Marques importées peuvent aussi être attachées à la signature. Leur taille et leur position sont automatiquement adaptées à toutes les situations de travail: lors du montage manuel sur la table lumineuse, lors de l'utilisation dans les jeux de marques, de même qu’avec la fonction de Refonte du montage. 
• Le format de la feuille peut être modifié à volonté tout en gardant la même position relative pour la signature, soit dans le centre de la feuille ou près de la prise de pince. Les positions de toutes les marques attachées à la feuille s’adapteront et les barres de couleurs pourront être ajustées au nouveau format. 
• Lors de l'utilisation de la fonction Refonte du montage, toutes les marques gardent leur position prévue par la détection et la mémorisation des points d'ancrage par rapport à l’objet auquel elles sont attachées: la feuille, la signature ou la page. Lorsque l'objet est déplacé ou redimensionné, les marques suivent en toutes circonstances. 
La fonction Refonte du montage détecte le nombre et le format des pages à partir des documents PDF et tient compte de tous les changements effectués dans le montage de la feuille initiale afin de générer dynamiquement le travail d’imposition complet sur la base des nouvelles données de production. Le même modèle peut ainsi être utilisé encore et encore pour construire un plan d'imposition complet en un seul clic. 

1.2 Accès rapide aux bibliothèques d’objets

Le travail sur la table lumineuse est plus facile que jamais avec les menus déroulants pratiques pour un accès rapide aux bibliothèques d'objets. Un clic sur l'icône de Définition d'un objet d’imposition affiche la liste de tous les paramètres enregistrés pour cet objet (feuille, signature, page, ou marques). 
Un menu d'accès rapide est également disponible pour les modèles de feuilles, à partir de l'icône d'action Charger modèle du mode Feuille. Créer un travail DynaStrip à partir d'un modèle est désormais un jeu d'enfant et lorsque ce nouvel accès aux bibliothèques est couplé avec la fonction Refonte du montage, il procure véritablement à l'opérateur de prépresse un outil de production rapide, robuste et flexible. 
Les nouveaux menus d’accès rapide sont entièrement compatibles avec les fichiers de définition d'objets et de modèles créés avec des versions précédentes de DynaStrip. Tous les fichiers doivent être rassemblés dans un dossier central sur l’ordinateur local ou sur le réseau, qui peut être défini dans le dialogue Préférences. Notez également que le dialogue Préférences est maintenant divisé en deux panneaux distincts pour les Réglages et les Dossiers, pour plus de commodité.

1.3 Facilité d'utilisation accrue 

Productivité signifie aussi facilité d'utilisation. DynaStrip 7.0 comprend un certain nombre d'autres améliorations visant à simplifier les opérations au quotidien. Parmi ces améliorations: 
• Les projets de DynaStrip sont maintenant sauvegardées dans un fichier de travail unique .dsz pour faciliter le partage de fichiers et l'archivage. 
• Les utilisateurs de DynaStrip Automation bénéficieront du rafraîchissement en direct du rendu des vignettes de pages (fonction Mode de rastérisation). Vous pouvez maintenant observer le processus d'imposition automatisée avec l’apparition en temps réel des vignettes de pages dans le montage. 
• Afin de permettre une plus grande visibilité dans ce contexte d’automatisation, le nombre maximum de feuilles pouvant être affichées simultanément sur la table lumineuse a été augmenté à 60.

1.4 Plus de flexibilité pour le prépresse et la presse

DynaStrip 7.0 ajoute de nouvelles fonctionnalités de prépresse et de presse: 
• Les marques importées recto-verso peuvent désormais suivre ou non l'axe de retournement de la feuille pour s'adapter aux besoins des différentes presses en retiration (perfecting). Plus besoin de définir et placer des marques à seul côté sur le recto, puis sur le verso, ce qui représente un gain de temps substantiel. 
• Les taquets latéraux peuvent également suivre ou non l'axe de retournement de la feuille pour s'adapter aux besoins des différentes presses en retiration (perfecting). 
• Lors du positionnement manuel d'une marque importée sur une imposition en demi-feuille ou en tête-à-queue, un attribut à un seul côté est automatiquement appliqué. 
• Le nombre maximum de Profils de sortie a été augmenté à 200 pour simplifier la création des flux de production de prépresse avec destinations de sortie multiples. Les Profils de sortie combinent les définitions de feuille et de plaque et permettent des ajustements spécifiques pour chaque combinaison feuille / plaque. 
Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Download

Compatible with: Mac OS X 10.4, 10.5, 10.6 or 10.7

If you have version 6.5 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.0.0 - Macintosh

DynaStrip 7.0 carries on the productivity goal of the last DynaStrip upgrades by featuring even smarter Layout Reflow, quick access to object libraries and templates, new options for marks and Automation, and single job working files. 

1.1 More Dynamic Objects for Layout Reflow 

The Layout Reflow function is smarter than ever with the addition of new dynamic behaviours. 
• Imported marks such as color bars can set to dynamically adapt to the sheet size. The image of the mark is cropped or repeated to fill the image area from the left side or the center, and an additional trim can be added to offset the mark from the sheet edges. 
• Imported marks can also be attached to signatures. Their size and position are automatically adapted in all working situations: when manually placed on the light table, when used in mark sets and when using Layout Reflow. 
• The sheet size can be modified at will while keeping the same relative signature position, in the center of the sheet, or snapped to the gripper. The position of all marks attached to the sheet will also adapt and color bars may resize to fit the new sheet format. 
• When using Layout Reflow, all marks keep their intended position by detecting and memorizing anchor points relative to the object to which they are attached: sheet, signature or page. When the object is moved or resized, the marks follow in all circumstances. 
The Layout Reflow function reads the number of pages and the trim box information from PDF documents and takes into account all changes done to the initial sheet layout to dynamically generate the entire job layout based on the new production data. The same template can thus be used again and again to build a complete imposition job with a single click.


1.2 Quick Access to Object Libraries 

Working on the light table is easier than ever with the convenient pull down menus for quick access to object libraries. Clicking on the Definition icon of an imposition object displays the list of all saved parameters for this object: sheet, signature, page, and all marks. 
A quick access menu is also available for Sheet templates, in the Load template action icon of the Sheet Mode. Starting a new DynaStrip job from a template is now a breeze and when coupled with the Layout Reflow function, the new access to libraries truly empowers the prepress operator with a quick, robust and flexible production tool. 
The new quick access menus are fully compatible with object definition files and templates created with previous DynaStrip versions. All files must be gathered in a central desktop or network folder that can be defined in the Preferences dialogue. Also note that the Preferences dialogue is now split in two distinct panels for Settings and Folders, for more convenience. 

1.3 Greater Ease of Use

Productivity also means ease of use. DynaStrip 7.0 includes a number of other enhancements to simplify the day-to-day operations. Among them: 
• DynaStrip jobs are now saved in a single .dsz working file to ease file sharing and archiving. 
• DynaStrip Automation users will benefit from the live refresh of the document page preview (Raster Mode function). You can now watch the automated imposition process with page thumbnails popping up in the layout in real time. 
• To allow for more visibility in this automation context, the maximum number of sheet that can be simultaneously displayed on the light table has been increased to 60.
 

1.4 More Flexibility for Prepress and Press 

DynaStrip 7.0 adds new Prepress and Press functionalities: 
• Double-sided Imported Marks can now follow or not the flip axis on Back to adapt to different perfecting press requirements. No need to define and place single-sided marks on both sides, a substantial time saver. 
• Side guides can also follow or not the flip axis on Back to adapt to various perfecting presses. 
• When manually positionning an Imported Mark on a Work and Turn or Work and Tumble sheet, a Single side attribute is enforced. 
• The maximum number of plate setups has been increased to 200 to simplify the creation of prepress workflows for multiple output destinations. Plate Setups combine sheet and plate definitions and allow for specific adjustments for each sheet/plate combination.

Several bugs have been resolved. For more details, see Release Notes for this version.

Download

Compatible with: Mac OS X 10.4, 10.5, 10.6 or 10.7

If you have version 6.5 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 7.0.0 - Macintosh

DynaStrip 7.0 carries on the productivity goal of the last DynaStrip upgrades by featuring even smarter Layout Reflow, quick access to object libraries and templates, new options for marks and Automation, and single job working files. 

1.1 More Dynamic Objects for Layout Reflow 

The Layout Reflow function is smarter than ever with the addition of new dynamic behaviours. 
• Imported marks such as color bars can set to dynamically adapt to the sheet size. The image of the mark is cropped or repeated to fill the image area from the left side or the center, and an additional trim can be added to offset the mark from the sheet edges. 
• Imported marks can also be attached to signatures. Their size and position are automatically adapted in all working situations: when manually placed on the light table, when used in mark sets and when using Layout Reflow. 
• The sheet size can be modified at will while keeping the same relative signature position, in the center of the sheet, or snapped to the gripper. The position of all marks attached to the sheet will also adapt and color bars may resize to fit the new sheet format. 
• When using Layout Reflow, all marks keep their intended position by detecting and memorizing anchor points relative to the object to which they are attached: sheet, signature or page. When the object is moved or resized, the marks follow in all circumstances. 
The Layout Reflow function reads the number of pages and the trim box information from PDF documents and takes into account all changes done to the initial sheet layout to dynamically generate the entire job layout based on the new production data. The same template can thus be used again and again to build a complete imposition job with a single click.


1.2 Quick Access to Object Libraries 

Working on the light table is easier than ever with the convenient pull down menus for quick access to object libraries. Clicking on the Definition icon of an imposition object displays the list of all saved parameters for this object: sheet, signature, page, and all marks. 
A quick access menu is also available for Sheet templates, in the Load template action icon of the Sheet Mode. Starting a new DynaStrip job from a template is now a breeze and when coupled with the Layout Reflow function, the new access to libraries truly empowers the prepress operator with a quick, robust and flexible production tool. 
The new quick access menus are fully compatible with object definition files and templates created with previous DynaStrip versions. All files must be gathered in a central desktop or network folder that can be defined in the Preferences dialogue. Also note that the Preferences dialogue is now split in two distinct panels for Settings and Folders, for more convenience. 

1.3 Greater Ease of Use

Productivity also means ease of use. DynaStrip 7.0 includes a number of other enhancements to simplify the day-to-day operations. Among them: 
• DynaStrip jobs are now saved in a single .dsz working file to ease file sharing and archiving. 
• DynaStrip Automation users will benefit from the live refresh of the document page preview (Raster Mode function). You can now watch the automated imposition process with page thumbnails popping up in the layout in real time. 
• To allow for more visibility in this automation context, the maximum number of sheet that can be simultaneously displayed on the light table has been increased to 60.
 

1.4 More Flexibility for Prepress and Press 

DynaStrip 7.0 adds new Prepress and Press functionalities: 
• Double-sided Imported Marks can now follow or not the flip axis on Back to adapt to different perfecting press requirements. No need to define and place single-sided marks on both sides, a substantial time saver. 
• Side guides can also follow or not the flip axis on Back to adapt to various perfecting presses. 
• When manually positionning an Imported Mark on a Work and Turn or Work and Tumble sheet, a Single side attribute is enforced. 
• The maximum number of plate setups has been increased to 200 to simplify the creation of prepress workflows for multiple output destinations. Plate Setups combine sheet and plate definitions and allow for specific adjustments for each sheet/plate combination.

Several bugs have been resolved. For more details, see Release Notes for this version.

Download